SATO M10e - Label Print Quantity

Section 7. Label Sheet Commands
Page 7-6 PN 9001101 Rev. A SATO M10e
Label Print Quantity
COMMAND STRUCTURE <ESC>_Q,aaaa,b
aaaa
b
=
=
Number of labels to be printed, 0001-9999
Number of blank labels following the number of labels
to be printed (may be omitted) 1-9
Example: <ESC>_Q,1,0
Placement: Following the data specified in the <ESC>_F or
<ESC>_D commands.
Default: aaaa=0001, b=0
COMMAND FUNCTION
PRINTER INPUT <ESC>A
<ESC>A106363060<ESC>PD,600,1020,0,0<ESC>_F
<ESC>V100<ESC>H200<ESC>P2<ESC>L0202<ESC>XMABCD
<ESC>V200<ESC>H200<ESC>P2<ESC>L0202
<ESC>B103200*11111*<ESC>_Q,4,0
<ESC>V100<ESC>H200<ESC>P2<ESC>L0202<ESC>XMBBBB
<ESC>V200<ESC>H200<ESC>P2<ESC>L0202
<ESC>B103200*22222*<ESC>_Q,2,1
<ESC>Z
PRINTER OUTPUT To specify the number of labels to be printed.
Special Notes
1. The value “b” may be omitted.