6 Troubleshooting
This chapter provides the information about accessories issues, internal errors and
their possible solutions.
6.1
Cutter and Dispenser Issues
Issue Solution
The cutter is experiencing issues.
■
If there is a paper jam, clear it.
■
The cutter has become loose. Fix the
cutter in position and tighten it.
■
The cutter blade is not sharp anymore.
Replace your cutter with a new one.
The dispenser is experiencing
issues.
■
If there is a paper jam, clear it.
■
The dispenser has become loose. Fix the
dispenser in position and tighten it.
■
Make sure the liner is correctly threaded
into the dispenser slot.
To Next Page
Loading...
