SATO WS408TT - Printer Buttons and Lights

WS4-TT-r01-30-12-16TM
6
1
Understand
Your
Printer
Printer
Button
and
Lights
1.5
Printer Button and Lights
This section describes the functions of the printer button and lights.
1.5.1 Feed Button
The FEED button is not simply for feeding label. It is able to act as a feed, pause,
resume, restore and run button. The following table shows its functions.
Function Description
Feed Feed a blank label.
Pause Pause printing, if pressed during printing.
Resume Resume printing, if pressed in pause mode.
Restore Restore the printer to the online mode, if pressed after
fixing the error.
Run Run the command of the system mode after selecting the
command.
1.5.2 Status lights
The printer has two status lights: LED 1 and LED 2. They are helpful for checking
printer’s condition. Both lights have three colors: green, orange and red; they also
have three blinking speed: fast, medium and slow. LED 1 glows green when the
printer is working properly; it glows orange or red when the printer encounters
issues. LED 2 indicates the issue the printer runs into. The following tables show
the LEDs behavior and the condition they indicate.
Symbol Blinking Speed Blinking Interval
**
Fast 0.5 Second
*
Slow 2 Seconds
* LED2 + *LED1 Slow LED2 & LED1 Blinking Interval at same time
* LED2 + LED1 * Slow LED2 & LED1 Blinking Interval at different timing