Property Name Description
IP Address (IPv4) The static IPv4 address of your printer.
Subnet Mask (IPv4)
The manually specified IPv4 subnet mask of
your printer.
Gateway (IPv4)
The manually specified IPv4 gateway of your
printer.
IP Address (Current IPv4) The current IPv4 address of your printer.
Subnet Mask (Current IPv4) The current IPv4 subnet mask of your printer.
Gateway (Current IPv4) The current IPv4 gateway of your printer.
RSSI Short for received signal strength indicator. It
measures your Wireless LAN signal strength.
The bigger the number, the stronger the
signal.
Network Authentication
Open
It allows any device to authenticate
to an access point (AP) and gain access to a
network, but only the device with the correct
WEP key can receive encrypted data while
the AP uses WEP encryption.
WPA-Personal
WPA-Personal uses
Pre-Shared Key (PSK) authentication, in which
all users use the same password to access a
network. WPA is designed to replace WEP. It
uses RC4 encryption as WEP, but provides
extra security through TKIP.
WPA2-Personal
WPA2-Personal includes all
features of WPA-Personal, but it uses AES
encryption to enhance security.
802.1X
802.1X is an IEEE standard that
provides EAP-based authentication methods
for network access control. It enhances
security by centralizing user identification,
authentication and key management.
WPA-Enterprise
WPA-Enterprise offers
centralized control over a network. It requires
an 802.1X authentication server (RADIUS
server) to validate users. Each user needs to
enter individual username and password to
access a network. It uses TKIP and RC4
To Next Page
Loading...
