Savant IP Audio 1 - Installation; PAV-SIPA50 SM Installation

Savant IP Audio Deployment Guide Copyright © 2020 Savant Systems, LLC
009-1571-03 | 200224 10 of 39
4. Installation
The all IP Audio devices can be installed in a National Electrical Manufacturers Association (NEMA) rack. Some of these devices require an optional rack
bracket.
4.1. PAV-SIPA50SM
Rack Installation
The PAV-SIPA50SM can be mounted in a 2U rack style enclosure and is compatible with all standard 19-inch NEMA rack mounts. The rack bracket
needs to be attached prior to placing in a rack.
Enclosure Installation
The PAV-SIPA50SM device can be mounted in a structured media panel. The enclosure brackets need to be attached prior to mounting. Savant
recommends using vented (louvered) enclosure doors.