Items for Specifying Scan Settings
105
6
D Specify Original Size (X1 and Y1) using the number keys, and then press
the {q} key.
For example, set X1 to 17.0 inch and Y1 to 8.0 inch.
E Set Start Position (X2 and Y2) to 0 inch, and then press the {q} key.
For example, set X2 and Y2 to 0 inch, and press the {q} key.
F Specify Scan Area (X3 and Y3) using the number keys, and then press the
{q} key.
For example, set X3 to 17.0 inch and Y3 to 8.0 inch.
G Press [OK].
H Check Scan Area (X3 and Y3) displayed in the [Custom Size] field, and then
press [OK].
Note
❒ You can specify original sizes (X1 and Y1) of 5.5 inch or larger.
To Next Page
Loading...
