Page 23/70 May 2015 I 2.0
You will then be asked if you wish to save the
field. If you tap on YES, you can then name the
field so that the field defined in this way is easier
to find in the list of fields. If you tap on NO, the
field will be saved with the name TEMPORARY
FIELD. The temporary field will be lost if you
choose to create a new field and do not save the
temporary field.
After the save operation described above has
ended, an option is displayed at the bottom of the
screen to create a new field or new operation.
To “Create a new field”, see chapter 4.1.
To “Define a new operation”, see chapter 4.2.
To Next Page