If ADD mode is set, the cumulative number will be displayed in COUNT mode.
If an error is occurred during operation and the machine stops, then an error message will be
displayed. To clear the error, press CLEAR key. The machine will try to solve the problem
automatically, but if it fails to clear a jam or there are some other mechanical errors, open the front
or rear cover and get rid of jammed bills and close the cover correctly. Then press the CLEAR key
again to clear error message. Especially in case of JAM3, it is recommended to open the front
cover and to check the machine before pressing CLEAR key.
Stop in operation
Press START button to stop operation while the machine is counting.
To restart, press CLEAR button.
To Next Page
Loading...
