9. Avoid direct viewing of the image sensor lights. The lamps are bright and, while not
harmful, they may cause an annoying afterimage. Always keep the rear cover closed
during operation and storage.
10. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries
according to the instruction.
FCC Compliance Statement
Safety Notes
Your machine and the supplies are designed and tested to meet strict safety requirements.
Included are safety agency examination and approval and compliance to established
environmental standards.
Please read the following instructions carefully before operating your machine, and refer to
them as needed to ensure the continued safe operation of your machine.
Battery is used for PBA IMAGE in this machine.
If wrong date and time are displayed on LCD after correct setting, it is necessary to change the
battery of PBA IMAGE.
Please read the following instructions carefully before changing the battery.
Warning
Hazardous moving parts!
Keep fingers and other body parts away
CAUTION
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
THIS DEVICE COMPLIES WITH PART 15 OF FCC RULES. OPERATION IS SUBJECT
TO THE FOLLOWING CONDITIONS:
1. THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
2. THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
To Next Page
Loading...
