● Channel B - tap twice. The LED flashes blue.
● Channel C - tap three times. The LED flashes purple.
4. Tap to activate the Cardo gateway. The LED flashes red and blue.
5. On the non-Cardo unit, activate Bluetooth mobile pairing mode (see the non-Cardo unit user manual).
6. The unit confirms that pairing has succeeded and the LED flashes purple for 2 seconds.
● To cancel the pairing process, press for 2 seconds. The LED stops flashing.
● If pairing is not completed within 2 minutes, the unit automatically returns to Standby.
● To reset all Bluetooth intercom pairing while in Bluetooth intercom pairing mode:
● Press and for 2 seconds. The LED flashes purple 5 times slowly, confirming that pairing has been
reset .
To pair your FREECOM4 with non-Cardo units through the SmartSet app:
1. Confirm your unit is in Standby mode (LED flashes slowly).
2. Open the SmartSet app and tap .
3. Tap Bluetooth.
4. Under Riders, tap Add (or Change if you are changing to whom the channel is paired) for the required channel
and follow the on screen menus.
5. On the non-Cardo unit, activate Bluetooth mobile pairing mode (see the non-Cardo unit user manual).
6. The unit confirms that pairing has succeeded and the LED flashes purple for 2 seconds.
● To reset all Bluetooth intercom pairing, tap Delete all.
To pair your FREECOM4 with non-Cardo units through the voice-assisted menu:
● When using voice-assisted menus, the unit automatically pairs through Channel B.
1. Confirm your unit is in Standby mode (LED flashes slowly).
2. Tap and .
3. When the voice-assisted menu reaches "Advanced Features", tap or use VOX.
4. When the voice-assisted menu reaches "Pair Cardo Gateway", tap or use VOX.
5. On the non-Cardo unit, activate Bluetooth mobile pairing mode (see the non-Cardo unit user manual).
6. The unit confirms that pairing has succeeded and the LED flashes purple for 2 seconds.
● To reset all Bluetooth intercom pairing, select the menu option "Reset Intercom Channels Pairing".
11
To Next Page
Loading...