Scalarider FREECOM 4 - Charging the FREECOM 4

2. CHARGING THE FREECOM4
Make sure that your FREECOM4 battery is charged for at least 4 hours before initial use.
To charge the FREECOM4:
1. Using the supplied USB cable, connect your computer or wall charger to the FREECOM4 USBport.
● Charging with the wall charger is faster than via a computer USB port.
● Charging your unit switches it off automatically. To use your unit while it is being charged, switch it on. (see
Switching Your Unit On/Off on page 6).
During charging, the LED indicates charging status as follows:
● red LED on - charging
● red LED off - charging complete
5