To end a Bluetooth intercom call, do one of the following:
● To use the unit buttons:
● To disconnect Channel A, tap .
● To disconnect Channel B, tap twice.
● To disconnect Channel C, tap three times.
● To use the SmartSet app: On the INTERCOM screen, select the required channel to disconnect.
If you initiated the Bluetooth intercom call using VOX and remain silent for at least 30 seconds, the call ends.
5.2.2 MAKING BLUETOOTH INTERCOM 3-WAY OR 4-WAY CALLS
For recommendations on making Bluetooth intercom 3-way and 4-way calls and pairing units for Bluetooth
intercom calls, see Pairing the Bluetooth Intercom on page 8.
To start a Bluetooth intercom 3-Way call, do one of the following:
● To use the unit buttons :
● To start a conference call on Channels A and B, press for 2 seconds.
● To start a call on Channel A or add Channel A to a call, tap .
● To start a call on Channel B or add Channel B to a call, tap twice.
● To start a call on Channel C or add Channel C to a call, tap three times.
● Use VOX. A Bluetooth intercom call on Channels A+B starts (if the the riders/passengers are paired and in range).
● To use the SmartSet app: On the INTERCOM screen, select Channels A+B.
● To use the voice-assisted menu:
a. Tap and .
b. When the voice-assisted menu reaches "Call Intercom", tap or use VOX.
27
To Next Page
Loading...