Scalarider FREECOM 4 - Audio Source Priorities

Limitations may apply when using certain iOS devices.
Your FREECOM4 sets the various audio sources to either foreground (volume remains the same) or background
(volume reduced) as described in the following table:
Mobile Phone 1/2 GPS Intercom 1 Intercom 2 Music FM Radio
Foreground Foreground
Foreground
1
Foreground
1
Foreground Foreground
Foreground Background
Foreground Background
Foreground Background
Foreground Background
Foreground
2,3
Foreground
2,3
Background
Foreground
4
Foreground
5
1
If you add an intercom call to a mobile phone call creating a conference call, the volume for both audio sources is the
same.
2
If you make two intercom calls simultaneously creating an intercom conference call, the volume for both audio
sources is the same.
3
If you make two intercom calls simultaneously creating an intercom conference call, you cannot hear the mobile
phone or GPS.
4
If you play music only, the music volume is not reduced.
5
If you play the FMradio only, the FM radio volume is not reduced.
In some cases, parallel audio streaming may not work properly due connected device limitations (music player or
GPS navigator). For more information, see FAQ on page 35.
Cardo recommends that during a 3-way or 4-way Bluetooth intercom conference call, the rider who is connected
to only one intercom call listens for mobile phone and GPS announcements.
You cannot use music sharing for voice audio with riders during parallel audio streaming.
To configure parallel audio streaming:
● SmartSet app - see Configuring Your FREECOM4 Basic Settings through the SmartSet App on page 15.
● Cardo Community - see Configuring Your FREECOM4 Basic Settings through Cardo Community on page 19.
4.5 AUDIO SOURCE PRIORITIES
If Parallel Audio Streaming is disabled, FREECOM4 manages the audio sources you hear through the speakers
according to the following audio source priorities.
22