To end a phone call through the SmartSet app:
1. In the Home screen, tap PHONE.
2. Press ENDCALL.
5.1.5 TOGGLING BETWEEN TWO CALLS ON TWO MOBILE PHONES PAIRED TO YOUR UNIT
Your FREECOM4 can toggle between two calls on two mobile phones when both mobile phones are paired to your
unit.
To toggle between two calls on two mobile phones through the unit buttons:
● Tap twice.
5.1.6 DISCONNECTING THE CURRENT CALL AND SWITCHING TO THE SECOND CALL
To disconnect the current call and switch to the call on the second phone when two mobile phones are paired to your unit, through
the unit buttons:
● Tap .
5.2 MAKING AND RECEIVING BLUETOOTH INTERCOM CALLS
● To make and receive Bluetooth intercom calls, you must first pair the Bluetooth, see Pairing the Bluetooth
Intercom on page 8.
● During a 3 or 4-way Bluetooth intercom conference call while riders are range (1.2 km / 3,900 ft), riders using
both Bluetooth intercom channels cannot receive phone calls or GPS instructions while the call is in progress.
5.2.1 MAKING A BLUETOOTH INTERCOM 2-WAY CALL
To start a Bluetooth intercom call with a passenger/rider, do one of the following:
● To use the unit buttons:
● To start a call on Channel A, tap .
● To start a call on Channel B, tap twice.
● To start a call on Channel C, tap three times.
● Use VOX. A Bluetooth intercom call with the passenger/rider on Channel A or B starts.
If Channels A and B are connected, VOX opens a Bluetooth intercom3-way call.
● To use the SmartSet app: On the INTERCOM screen, select the required channel (A, B or C).
● To use the voice-assisted menu:
a. Tap and .
b. When the voice-assisted menu reaches "Call Intercom", tap or use VOX.
26
To Next Page
Loading...