Scalarider FREECOM 4 - Before You Ride; Configure via SmartSet App

4. BEFORE YOU RIDE
Get the most out of your FREECOM4 by changing the settings and customizing your unit according to your own
personal preferences, using either of the following methods:
● SmartSet App on iOS / Android (see Configuring Your FREECOM4 through the SmartSet App on page 15).
● Cardo Community on Windows / Mac - minimum requirements - Windows® 7 / Mac OS X 10.8 (see Configuring
Your FREECOM4 through Cardo Community on page 19).
● Unit buttons.
● Configuration voice menu on your device.
Cardo recommends customizations and settings before getting out on the road.
Object
Default Value Description
SmartSet App
(iOS/Android)
Cardo
Community
Configuration Voice
Menu
AGC sensitivity
(Off/Low/Medium/High)
Medium AGC
automatically
adjusts speaker
volume according
to ambient noise
and riding speed.
For example,
when set to Low,
higher ambient
noise will cause
the volume
increase to kick in
at a higher level.
ü ü ü
Audio priority
(A2DP/Bluetooth
intercom)
Bluetooth
intercom
Priority of audio
source playing
through speakers.
Either music is
not interrupted
by an intercom
call, or vice-versa.
ü ü ü
Background Audio
Level
N/A Sets the
background
audio volume
when parallel
audio streaming
is on (see Parallel
audio streaming
(Enable/Disable)
below).
ü û û
Bluetooth friendly name
FREECOM 4 Sets the name
that appears on
your phone while
pairing and in the
SmartSet app.
ü ü û
12