Scalarider FREECOM 4 - Listening to FM Radio

b. When the voice-assisted menu reaches "Scan Tracks Up", tap or use VOX.
c. When you hear a track that you want to play, tap or use VOX.
To backward auto scan tracks (while streaming music) and then play your desired track:
● To use the SmartSet app:
a. On the MUSIC screen, under MUSIC SCAN, tap . Backward scan plays a few seconds of each track.
b. When you hear a track that you want to play, on the MUSIC screen, under MUSIC SCAN, tap .
● To use the voice-assisted menu:
a. Tap and .
b. When the voice-assisted menu reaches "Scan Tracks Down", tap
c. When you hear a track that you want to play, tap or use VOX.
5.3.1.1 SWITCHING MUSIC SOURCES
If two music (A2DP) audio sources are paired, FREECOM4 uses the audio source from which you last played music.
To switch to the other audio source:
1. Stop music (A2DP) playback from the current device (see Listening to Music on page 30).
2. Play music (A2DP) from the other device (see Listening to Music on page 30).
FREECOM4 automatically remembers your last played device.
5.3.2 LISTENING TO FM RADIO
To turn on the FMradio, do one of the following:
When you switch on your FMradio, the station that was playing when you last switched off resumes playing.
● To use the unit buttons: tap twice.
● To use the SmartSet app: on the FM screen, tap ON/OFF.
● To use the voice-assisted menu:
a. Tap and .
b. When the voice-assisted menu reaches "Radio On", tap or use VOX.
To turn the FMradio off, do one of the following:
● To use the unit buttons: press for 2 seconds.
● To use the SmartSet app: on the FM screen, tap the On/Offbutton.
● To use the voice-assisted menu:
a. Tap and .
b. When the voice-assisted menu reaches "Radio Off", tap or use VOX.
31