Scalarider FREECOM 4 - Page 32

To play a different preset station:
● To use the unit buttons, do one of the following:
● tap for the next preset
● tap twice for the previous preset
● To use the SmartSet app: On the FM screen, tap the desired preset.
To seek the next available station:
● To use the SmartSet app: On the FM screen, do one of the following:
● tap .
● tap .
To scan available stations and select your desired station:
● To use the unit buttons:
a. Tap and . The FMradio plays each station that it finds for several seconds.
b. When you hear a station you want to select, tap or use VOX.
● To use the voice-assisted menu:
a. Tap and .
b. When the voice-assisted menu reaches "Scan Stations Up", tap or use VOX.
To store a scanned station in the active preset:
● To use the unit buttons: tap within 20 seconds of stopping the scan.
To set all presets efficiently using Cardo Community, see Configuring Your FM Radio through Cardo Cardo
Community on page 20.
To set all presets efficiently using the SmartSet app, see Configuring Your FM Radio Manually on page 17.
Temporarily Storing New FMRadio Preset Stations Using Auto Tuning
You can temporarily store new FM radio stations in the presets using auto tuning and restore the original presets when
you want.
To temporarily store new stations in the presets (auto tuning):
● To use the unit buttons: press for 5 seconds.
● To use the SmartSet app: on the FM screen, tap .
● To use the voice-assisted menu:
a. Tap and .
b. When the voice-assisted menu reaches "Auto Scan 6 Stations", tap or use VOX.
32