Scania D11 - Lubrication System; Fuel System

1997-11:2 © Scania Industrial & Marine Engines 41
FUEL SYSTEM D11 DC11 DI11
Pump setting BTDC
See plate on rocker cover
Injectors, opening pressure bar (kp/cm
2
)
300
Low idle rpm
700
Maximum full load speed
See engine card
Fuel
Diesel fuel oil
1
Tightening torques:
Socket nut for injectors Nm
Cap nut for delivery pipe Nm
Oil leakage connection Nm
70
20
11
1
see page 42
COOLING SYSTEM
Number of thermostats
2
Thermostat, opening temperature
°C
79
Coolant temperature:
system with atmospheric pressure
°C
system with positive pressure
°C
70 - 93
70 - about 100
Capacity including radiator, engine and expansion tank
and for DSI11 including charge air cooler
with 0.75 m
2
radiator dm
3
(litres)
with 1.00 m
2
radiator dm
3
(litres)
53 55 -
58 58 60
ELECTRICAL SYSTEM
System voltage V
24
Alternator, current A
65 or 90
Starter motor power kW (hp)
6.6 or 6.7 (9.0 or 9.1)
Monitors, alarm values:
oil pressure monitor bar (kp/cm
2
)
temperature monitor °C
0.7
± 0.15
Stamped on monitor hexagon