Technical data
OPM 200 en-GB 113
© Scania CV AB 2020, Sweden
Technical data
General data
Lubrication system
Number of cylinders and configuration 6, straight
Working principle 4-stroke engine
Cylinder diameter (mm/in) 130/5.12
Piston stroke (mm/in) 160/6.30
Displacement (dm
3
/in
3
)
12.7/775.0
Firing sequence 1 - 5 - 3 - 6 - 2 - 4
Compression ratio
DC13 310/311/312/313/320 21.6:1
DC13 072/073A 16.3:1
DC13 074/076/077/071A 17.3:1
DC13 084/384/085/385/087/387/089/389A 17.5:1
DC13 078/080/081/082/083/091A 18:1
Engine direction of rotation viewed from rear Anti-clockwise
Fan direction of rotation viewed from front Clockwise
Cooling Coolant
Valve clearances, cold engine
Intake valve (mm/in) 0.45/0.018
Exhaust valve (mm/in) 0.70/0.028
Number of teeth on the flywheel 158
Low idling speed (rpm) 500-975
Maximum full-load speed (rpm) 1,800/2,100
Fuel Diesel
Approximate weight, without coolant and oil (kg/lb)
DC13 084/384/085/385/087/387/089/389A 1,075/2,370
Other engine types 1,050/2,315
Oil volume See Maintenance
Oil cleaning Centrifugal oil cleaning
Oil cooler Coolant cooled, full flow
Oil filter Paper filter from Scania
Interval between oil changes (h) 500
Oil pressure (bar/psi)
Normal with the engine at operating temperature, operating speed 3-6/43.5-87
Minimum permitted at idling speed 0.7/10.2
Crankcase pressure with closed crankcase ventilation (mbar/psi) -5.4 to 2.0/-0.08 to 0.03
To Next Page
Loading...
