Scania DC13 XPI - Checking the Oil Level; Maximum Angles of Inclination During Operation

Lubrication system
OPM 200 en-GB 47
© Scania CV AB 2020, Sweden
Checking the oil level
Note:
Leave the engine off for at least 7 minutes before
you check the oil level.
1. Pull out the oil dipstick and check the oil lev-
el. The correct level is between the minimum
and maximum marks on the oil dipstick.
2. Top up with more oil via the oil filler if the
oil level is at or below the minimum mark.
For information on the correct oil grade, see the
section Oil grade
.
Maximum angles of inclina-
tion during operation
Maximum permissible angles of inclination dur-
ing operation vary, depending on the type of oil
sump. See illustration.
1
2
375 553
1. Oil dipstick
2. Oil filler
25°
25°
30°
35°
35°
35°
30°
30°
40°
40°
45°
45°
5°
5°
5°
5°
423 151