Scania DC13 XPI - Venting the Fuel System

Fuel system
OPM 200 en-GB 86
© Scania CV AB 2020, Sweden
Venting the fuel system
Venting the fuel system using a suc-
tion tool
Note:
Scania recommends venting the fuel system us-
ing suction tools rather than with a hand pump.
This is a quicker and simpler method, which en-
sures a complete venting.
Environment
Use a suitable container. The fuel collected must
be disposed of as specified in national and inter-
national laws and regulations.
1. Open the bleed nipple on the high pressure
pump and connect the suction tool.
Tools
Designation Illustration
Suction tool
337 297
329 119