Starting and running
OPM 200 en-GB 24
© Scania CV AB 2020, Sweden
Starting and running
Checks before first start
Before the engine is started for the first time, car-
ry out the maintenance items listed under First
start in the maintenance schedule. Check the fol-
lowing:
• Oil level.
• Coolant.
• Fuel level.
• Fluid level in batteries.
• State of battery charge.
• Condition of the drive belt.
• Level in the reductant tank, if the engine is
equipped with an SCR system.
See also Maintenance interval
.
Running the engine without reductant in the re-
ductant tank violates emissions legislation and
will damage the SCR system.
Reductant tank
Reductant tanks come in five different sizes. The
volumes indicated for each tank are filling vol-
umes.
1. 38 litres (10 US gallons).
2. 60 litres (15.8 US gallons).
3. 45 litres (11.9 US gallons).
4. 63 litres (16.6 US gallons).
5. 70 litres (18.5 US gallons).
A filler filter with magnet is fitted in the reduct-
ant tank to prevent the reductant from becoming
contaminated when topping up. It is used when
refuelling at a filling station. A filler filter with-
out a magnet is also supplied for use when filling
manually.
To Next Page
Loading...
