Scania DC13 XPI - Hose Clamps

General tightening torques for screw joints
OPM 200 en-GB 117
© Scania CV AB 2020, Sweden
Hose clamps
The specifications in the tables show tightening
torque when tightening by hand
A = width
(mm)
Tightening torque
Nm Lb-ft
7.5-9 1.5 1
12 5 4
A = width
(mm)
Tightening torque
Nm Lb-ft
20 10 7
25 20 15
327 162
D
A
Tightening torque for new unfitted hose clamp is
max 1 Nm (0.7 lb-ft).
A
326 615
A
326 616