Cooling system
OPM 200 en-GB 63
© Scania CV AB 2020, Sweden
Topping up
Coolant must only be topped up with pre-mixed
coolant. The pre-mixed coolant can either be
concentrate mixed with clean freshwater or pre-
mixed coolant from the factory. Use only pure
fresh water that is free from particles, sludge and
other impurities.
Containers used for mixing coolant must be in-
tended for the purpose and free from any dirt or
contaminants. When the containers not in use
they must be kept closed to avoid collecting dirt
and dust.
Within the coolant change interval, coolant may
only be reused if it has been cleaned of dirt,
sludge and particles. If the coolant is contaminat-
ed with oil or fuel, it must not be reused.
To Next Page
Loading...
