Lubrication system
OPM 300 en-GB 43
© Scania CV AB 2020, Sweden
Table Stage V
Table of oil change intervals for engines that
comply with stage V. For other engines, a service
interval of 500 hours applies.
The table does not apply for engines that:
• occasionally have much higher consumption
• have an idling percentage > 15%
• or if the engine is used at high coolant tem-
peratures
• If the engine is used with fuels that do not
comply with the EN950/EN15940/MK1
standard
For operation at extremely low outdoor tempera-
tures: Consult your nearest Scania workshop on
how to avoid starting difficulties.
If the engine is used in areas of the world where
engine oil with ACEA or API classification is
not available, the oil grade must be measured in
actual operation. In this case contact the nearest
Scania workshop.
Oil Oil change intervals
Medium load (l/h)
< 41 < 43 > 43
LDF-4 750 h 500 h 500 h
Other 500 h 500 h 400 h
To Next Page
Loading...
