EasyManuals Logo

Scania DC9 User Manual

Scania DC9
58 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
2 © Scania Industrial & Marine Engines 2003-10:1
PREFACE
This Operator's Manual describes the handling and maintenance of Scania
DC9 and DI9 Industrial Engines with DEC2.
The engines are of direct-injection, liquid-cooled, four-stroke, 6-cylinder in-
line diesel type. These engines have turbochargers and charge air coolers: see
page 10.
Common applications are as power units in construction machines, generator
sets, earth-moving, railway and forestry machines as well as in irrigation
systems.
The engines can have different output and speed settings.
The normal output setting of the engine (performance code) is indicated on
the type plate, see page 10.
Note: Only standard components are described in the Operator's
Manual. Regarding special equipment, refer to the instructions of
the relevant manufacturer.
In order to obtain the best value and service life from your engine, there are
several points you should bear in mind:
- Read the manual before starting to use the engine. Even though you may
be experienced with Scania engines you may find new information in
this Operator's Manual.
- Follow the maintenance instructions. Good working order and service
life are ensured if maintenance is carried out according to the
instructions.
- In particular, read the safety information starting on page 6.
- Get to know your engine so that you know what it can do and how it
works.
- Whenever necessary, always contact an authorised Scania workshop.
They have special tools, genuine Scania parts and staff with training and
practical experience of Scania engines.
Note: Always use genuine Scania parts during service and repair so as
to keep your engine in the best possible working order.
The information in this manual was correct at the time of going to press.
However, we reserve the right to make alterations without prior notice.
Scania CV AB
Industrial and Marine Engines
S-151 87 Södertälje, Sweden
During the warranty period,
only genuine Scania parts may
be used during service and
repair otherwise the warranty
will be invalidated.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Scania DC9 and is the answer not in the manual?

Scania DC9 Specifications

General IconGeneral
Displacement9.3 liters
Fuel TypeDiesel
Bore130 mm
Stroke140 mm
Fuel SystemCommon Rail
Engine TypeDiesel
Cooling SystemLiquid-cooled

Related product manuals