2003-10:1 © Scania Industrial & Marine Engines 27
MAINTENANCE SCHEDULE
1. More often if required
2. For engines with few operating hours, see page 26.
3. Earlier if low pressure indicator shows red.
4. If inhibitor has not been topped up for five years, the coolant should be changed.
Daily
First
time at
Interval At least
First start
400 h
200 h
400 h
1200 h
2400 h
4800 h
Annually
Every 5th year
LUBRICATING OIL SYSTEM, page 28
1. Checking oil level
2. Oil change
1
3. Cleaning oil cleaner
1
4. Renewing the oil filter
1
COOLING SYSTEM, page 32
5. Checking coolant level
6. Checking coolant
4
7. Cleaning cooling system
1
AIR CLEANER, page 38
8. Test reading low pressure indicator
9. Cleaning the coarse cleaner
1
10. Cleaning or changing filter element
3
11. Changing safety cartridge
FUEL SYSTEM, page 40
12. Checking fuel level
13. Changing main filter
1
14. Checking injectors
ELECTRICAL SYSTEM, page 42
15. Checking electrolyte level in batteries
2
16. Checking state of charge in batteries
2
17. Cleaning batteries
2
18. Checking level monitor
19. Checking temperature monitor
20. Checking oil pressure monitor
MISCELLANEOUS, page 46
21. Checking drive belt
22. Look for leakage, rectify as necessary
23. Checking/adjusting valve clearances
24. Changing (or cleaning) valve for closed crankcase
ventilation
To Next Page
Loading...
