OPM 250 en-GB 2
© Scania CV AB 2022, Sweden
Start of warranty . . . . . . . . . . . . . . . . . . . . . . . . 3
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Power classes . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Environment and safety . . . . . . . . . . . . . . . . . . 6
Environmental liability . . . . . . . . . . . . . . . . . . 6
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Warnings and advisories . . . . . . . . . . . . . . . . . 7
Scania Engines engine warranty for marine en-
gines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Emission control systems warranty. . . . . . . . 12
Emission control system warranty statement 12
Engine data plate . . . . . . . . . . . . . . . . . . . . . . . 16
Component identification . . . . . . . . . . . . . . . . 17
Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
SCR system . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Starting and running . . . . . . . . . . . . . . . . . . . . 19
Checks before first start . . . . . . . . . . . . . . . . 19
Checks before running . . . . . . . . . . . . . . . . . 21
Starting the engine . . . . . . . . . . . . . . . . . . . . 21
Running. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Engine shutdown. . . . . . . . . . . . . . . . . . . . . . 25
Checks after driving . . . . . . . . . . . . . . . . . . . 26
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Maintenance interval. . . . . . . . . . . . . . . . . . . 28
Lubrication system . . . . . . . . . . . . . . . . . . . . . 29
Oil grade . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Oil analysis . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Checking the oil level . . . . . . . . . . . . . . . . . . 32
Maximum angles of inclination during operation
32
Changing the oil . . . . . . . . . . . . . . . . . . . . . . 33
Cleaning the centrifugal oil cleaner . . . . . . . 34
Operational testing of the centrifugal oil cleaner
38
Renewing the oil filter. . . . . . . . . . . . . . . . . . 39
Renewing the commutative oil filter. . . . . . . 39
Air cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Reading the vacuum indicator. . . . . . . . . . . . 40
Renewing the air cleaner filter element and safe-
ty cartridge . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Renewing an air filter with a non-renewable ele-
ment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Cooling system . . . . . . . . . . . . . . . . . . . . . . . . . 42
Coolant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Checking the coolant level . . . . . . . . . . . . . . 47
Checking the coolant's antifreeze and corrosion
protection . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Checking the sacrificial anodes. . . . . . . . . . . 49
Checking the sea water pump impeller . . . . . 50
Changing the coolant and cleaning the cooling
system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Fuel system . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Cleanliness requirements . . . . . . . . . . . . . . . .62
Checking the fuel level. . . . . . . . . . . . . . . . . .62
Draining and renewing the single water separat-
ing prefilter (option). . . . . . . . . . . . . . . . . . . .63
Draining the reversible water separating prefilter
(option). . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
Renewing the reversible water separating prefil-
ter (option) . . . . . . . . . . . . . . . . . . . . . . . . . . .66
Renewing the fuel filter . . . . . . . . . . . . . . . . .68
Renewing and venting commutative fuel filters
(option). . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
Venting the fuel system . . . . . . . . . . . . . . . . .70
Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . .72
Checking the drive belt . . . . . . . . . . . . . . . . .72
Checking for leakage . . . . . . . . . . . . . . . . . . .73
Checking and adjusting the valve clearance and
unit injectors. . . . . . . . . . . . . . . . . . . . . . . . . .74
Renewing the reductant filters . . . . . . . . . . . .79
Quality requirements for fuel . . . . . . . . . . . . .82
Diesel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82
Biodiesel (FAME) . . . . . . . . . . . . . . . . . . . . .85
HVO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86
GTL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86
Reductant with SCR . . . . . . . . . . . . . . . . . . . . .87
32.5% by weight of urea . . . . . . . . . . . . . . . .88
40% by weight of urea . . . . . . . . . . . . . . . . . .88
Preparing the engine for storage . . . . . . . . . . .89
Preservative products . . . . . . . . . . . . . . . . . . .89
Preparations for storage . . . . . . . . . . . . . . . . .90
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . .92
General data . . . . . . . . . . . . . . . . . . . . . . . . . .92
Lubrication system . . . . . . . . . . . . . . . . . . . . .93
Intake system . . . . . . . . . . . . . . . . . . . . . . . . .93
Cooling system. . . . . . . . . . . . . . . . . . . . . . . .93
Injection system . . . . . . . . . . . . . . . . . . . . . . .94
Electrical system . . . . . . . . . . . . . . . . . . . . . .94
Material content . . . . . . . . . . . . . . . . . . . . . . .94
Scania Assistance . . . . . . . . . . . . . . . . . . . . . . .95
Tightening torque for screw joint . . . . . . . . . .96
Screws and nuts . . . . . . . . . . . . . . . . . . . . . . .96
Hose clamps . . . . . . . . . . . . . . . . . . . . . . . . . .97