OPM 250 en-GB 28
© Scania CV AB 2022, Sweden
Maintenance
Maintenance interval
Daily First time at Interval (hours) Minimum
first start 500 500 1,000 2,000 6,000 annu-
ally
every
5
years
RSMLXL
Lubrication system
Checking the oil level XX
Changing the oil XXXXXX
Cleaning the centrifugal oil
cleaner
XXXXXX
Renewing the oil filter XXXXXX
Air cleaner
Reading the vacuum indicator X XXXXX
Renewing the filter element XX X
Renewing the safety cartridge XX X
Renewing an air filter with a
non-renewable element
XX X
Cooling system
Checking the coolant level X X XXXXX
Checking the coolant's antifreeze
and corrosion protection
XXXX
Checking the sacrificial anodes XXXXXX
Checking the sea water pump
impeller
XXXXXX
Changing the coolant and clean-
ing the cooling system
XX
Fuel system
Checking the fuel level XX
Draining the water separating
prefilter
X XXXXX
Renewing the fuel filters XXX X
Miscellaneous
Checking the drive belt XXXXX
Checking for leakage X XXXXX
Checking and adjusting the valve
clearance and unit injectors
XXX
Renewing the reductant filters XXXXXX
To Next Page
Loading...
