Scania DI13 - Renewing the fuel filter

Fuel system
OPM 250 en-GB 68
© Scania CV AB 2022, Sweden
Renewing the fuel filter
Environment
Use a suitable container. The fuel collected must
be disposed of as specified in national and inter-
national laws and regulations.
1. Clean the exterior of the filter with a damp
cloth.
2. Unscrew the filter.
3. Apply oil to the gasket on the new filter.
4. Screw the filter into place by hand until it
makes contact.
5. Screw a further half turn by hand.
6. Bleed the fuel system according to the in-
structions in the Venting the fuel system
sec-
tion.
325 167