OPM 360 en-GB 10
© Scania CV AB 2017, Sweden
Environment and safety
Lubrication system
Hot oil can cause burns and skin irritation. Wear
protective gloves and goggles when changing
hot oil.
Make sure that there is no pressure in the lubri-
cation system before starting work on it.
Make sure that the oil filler cover is fitted when
starting and running in order to avoid oil escap-
ing.
Used oil must be disposed of as specified in na-
tional and international laws and regulations.
Cooling system
Never open the coolant filler cap when the en-
gine is hot. Hot coolant and steam may spray out
and cause burns.
If the cap has to be opened do it slowly to release
the pressure before removing the cap. Wear pro-
tective gloves as the coolant is still very hot.
Used coolant must be disposed of as specified in
national and international laws and regulations.
Fuel system
Maintenance and repairs of injection equipment
are to be carried out by an authorised Scania
workshop.
Always use Scania spare parts for the fuel and
electrical systems. Scania spare parts are de-
signed to minimise the risk of fire and explosion.
Use a suitable container. The fuel collected must
be disposed of as specified in national and inter-
national laws and regulations.
Electrical system
Switch off the engine and switch off the power
by disconnecting the electrical cables to the bat-
tery. External power supplies to extra equipment
on the engine must also be disconnected.
Always use Scania spare parts for the fuel and
electrical systems. Scania spare parts are de-
signed to minimise the risk of fire and explosion.
To Next Page
Loading...
Need help?
General
