2. Safety Regulations
Read this entire chapter carefully! Failure to comply with safety regulations may
result in serious injuries or damages.
2.1 Legend
Notation regarding safety
Notation regarding electrical safety
Notation regarding safety during transport
Tipping hazard
See reference
2.2 Safety precautions
Any machine, if it is not used according the regulations, may be hazardous for
operating, setting-up and service personnel. The operating authority is respon-
sible for compliance with the safety regulations during operation and mainte-
nance, and for the use of safety devices supplied with the machine, as well as
the provision of appropriate additional safety devices!
Eye and ear protection must be worn at all times.
Never operate the machine when it’s not in its upright position.
Make sure there is no debris in the work area.
Check the work area for screws or other hard objects in the concrete. Don’t use the
machine if there are any foreign objects stuck into the surface. Such objects must be
removed prior to operation of machine.
Read “2.3Organizational measures” and “2.5 Safety regarding operation of machine”
thoroughly before operation!
45
www.scanmaskin.com
SCANMASKIN 650 ENGLISH
To Next Page
Loading...
