SCANMASKIN 650 - Inside Vehicles; Transport; Precautions; Manual Transport

2.9.3 Inside vehicles
Secure the machine according to local transport safety regulations before transport-
ing the machine inside a vehicle.
3. Transport
3.1 Precautions
Read “2.9 Safety regarding transport” before attempting to transport the machine.
3.2 Manual transport
Detach the tools according to the instructions in “4.11 Changing tools”.
Push the handle downwards to lift the gear barrel about 10 cm (4”) from the
ground.
Push the machine in desired direction.
3.3 Lifting
Before attempting to lift the machine, read “2.9.2 Lifting”
Detach the tools according to the instructions in “4.11 Changing tools”.
Fasten the straps used for lifting at the two handles as shown in “Figure 31”.
Lift the machine.
Figure 3.1 Lifting points
3.4 Inside vehicles
Detach the tools according to the instruction in “4.11 Changing tools”.
Secure the machine inside the vehicle.
52
www.scanmaskin.com