Users manual Coffee on the Spot
Scanomat A/S Vibe Allé 3. Postboks 131 DK-2980 Kokkedal (Copenhagen) Reg.nr. 236.990
Tel: (+45) 49 18 18 00. Fax: (+45) 49 18 01 18
14
Cup size:
a) Press while the SERVICE program is active. The display will show:
b) Press the key for the selection to be adjusted and the display will now show the current setting for
this:
14 being the current cup size
c) Press and to adjust this up and down respectively. The size of one step is approximately
5 percent. The range is from 0 through 31. Note: If the cup size is set to 0, the selection will be
locked..
d) Press to accept the value, and the program is now ready for adjusting strength.
Strength:
For mixed drinks, it is possible to adjust the strength for the individual components. The sequence
of the product to be adjusted is the same as the sequence in the print out of the recipe.
a) After adjusting the cup size, the display will show:
21 being the current strength for product 1
To Next Page
Loading...
