Users manual Coffee on the Spot
Scanomat A/S Vibe Allé 3. Postboks 131 DK-2980 Kokkedal (Copenhagen) Reg.nr. 236.990
Tel: (+45) 49 18 18 00. Fax: (+45) 49 18 01 18
19
or
a) Press and to select between the 2 functions.
b) Press to accept the new value.
Service functions
All functions in this section requires, the coffee brewers SERVICE program is active. This is activated by
pressing the key positioned on the inside of the door of the coffee brewer. The display will show:
Note:
The coffee brewer can be set up to automatically leave the SERVICE program, if no key has
been activated for a period of 15 seconds.
The coffee brewer can be set up in a way, that the key is not active. In this case the
SERVICE program is activated by pressing a code on the keyboard. This code is available
from Your Scanomat dealer.
Reading out the counters:
The coffee brewer will count all the drinks dispensed. By carafe selections, the number of cups for each
carafe will be counted. Reading out the counters is done as follows:
Press while the SERVCIE program is active and the display will show the total cup counter
(example):
To Next Page
Loading...
