8
BA 68
Schaeffler Technologies
Schaeffler OPTIME
Usage for
the intended purpose
The OPTIME condition monitoring system is approved for use
in indoor and outdoor industrial environments. The system may only
be used in accordance with the technical data, see page 83.
Unauthorized structural modifications to the system are not permiss-
ible. We assume no liability for any damage to machinery or injury
to persons arising from such actions.
Usage for the intended purpose also includes the following:
■
all guidelines in the user manual are observed
■
compliance with all relevant specifications on occupational
safety and accident prevention during all life cycles of the system
■
the necessary specialist training and authorisation of your
company for carrying out the necessary work on the system.
Usage not for
the intended purpose
The OPTIME condition monitoring system does not provide machine
protection. It must not be used as a component of safety systems.
For use in environments with an explosion risk, please note
the markings on the sensors (expected to be available from 2022).
The OPTIME condition monitoring system is not classified as a safety
component in accordance with the Machine Directive 2006/42/EC.
Warranty
The manufacturer shall assume liability for warranties in relation
to operational security, reliability and performance only under
the following conditions:
■
Installation and connection must be carried out only by
authorised and skilled personnel.
■
The system must be used in accordance with the information
in the technical data sheets. The limit values indicated in the
technical data must not be exceeded under any circumstances.
■
Conversion and repair work on the system may only be carried out
by the manufacturer.
To Next Page
Loading...
