Schaeffler Technologies
BA 68
9
Selection and
qualification of personnel
The OPTIME condition monitoring system may only be mounted,
commissioned and operated by qualified personnel. The scope
of competence, area of responsibility and monitoring of personnel
must be precisely regulated by the site operator.
Designated qualified personnel:
■
are authorised to install the system
■
have all the necessary knowledge
■
are familiar with the safety guidelines
■
have read and understood this manual.
If personnel do not possess the necessary knowledge, they must be
given the necessary training and instruction. Schaeffler can offer
appropriate training courses on request.
Work on electrical devices
Work on electrical devices may only be carried out by a trained
electrician.
On the basis of their technical training, knowledge and experience as
well as their knowledge of the appropriate regulations, a trained
electrician is in a position to assess the work assigned to them and
recognise possible hazards.
Do not repair any damaged system components. Please arrange
for any necessary repairs to be carried out by Schaeffler Monitoring
Services GmbH.
Any work on wiring, opening or closing of electrical connections may
only be performed while disconnected from the power supply and
in a voltage-free state.
To Next Page
Loading...
