Schaeffler Technologies
BA 68
29
Mechanical installation of gateway
Suitable fixing material must be selected to match the surface
quality of the substrate. Install the gateway using the mounting
brackets supplied. Once the gateway has been fixed to the selected
location, the electrical connection must be carried out by a qualified
electrician.
Fix the gateway to the selected location.
Electrical connection of gateway
For the electrical connection the customer has to provide a suf-
ficiently long connection cable with the appropriate specifications.
Failure to observe the safety regulations may result in a life-
threatening electric shock. Make sure that all electrical connections
are carried out only by a qualified electrician.
A defective connection cable can cause a life-threatening electric
shock. Make sure that any defective connection cables are replaced
immediately by a qualified electrician.
Figure 16
Mount the gateway
O
P
T
IME
To Next Page
Loading...
