BASCP_EN
V08 | 08.2018
37
www.schaerer.comOperation
► Close the door.
Dispensing
Adjusting the cup grate
If a large container is being used, e. g. a Latte Macchiato glass, the adjustable cup grid must
be swivelled to the right.
► Grip the cup grid, move it to the right and let it engage.
► Place the cup on the cup grid of the drip tray.
Beverages
► Place a cup under the beverage outlet.
► Press the desired beverage field.
The progress of the beverage dispensing will be shown on the main screen.
► Remove the cup after the beverage has been dispensed.
Double beverages (Option)
Double dispensing of a beverage for pure coffee beverages. When dispensing double bever-
ages, position the cups or glasses properly under the beverage outlet:
► Move the cup grid into place.
► Place the cups on the grid and position them under the beverage outlet.
► Press the desired beverage field.
The progress of the beverage dispensing is shown on the display.
► Remove the cups after the beverage is dispensed.
For dispensing coffee into pots* (Option)
(*) This function is not currently available.
Dispensing of a significant amount of coffee directly into a pot:
► Swivel out side beverage outlet.
The configured beverage field is activated.
► Place the pot underneath the side beverage outlet.
► Select the beverage field.
The output is carried out according to the beverage configuration.
► Remove the pot and swivel the side beverage outlet back towards the machine.
See "Dispensing options" - "Stop dispensing" to stop dispensing of the beverage.
According to the beverage configuration and the amount of coffee required, a variant is select-
ed and dispensed by pressing the beverage button several times.
To Next Page
Loading...
