BASCP_EN
V08 | 08.2018
73
www.schaerer.comProgramming
Restaurant manager profile
The Restaurant manager has access to the beverage parameters, the self-service mode and
the setting in the "Accounting" menu.
The [Restaurant manager] profile contains the following main menus:
• Configuration
•Info
In the [Restaurant manager] profile, the following functions are available for direct selection in
the "Service menu":
• Switch on milk system
• Switch on self-service mode
• Switch on quick info
• Settings
• Standby
• Open service door
The contents of the main menus are subsequently described in this chapter.
"Configuration" main menu
"Beverage parameters" menu Description Setting range Notes
Tabs 1 to 5
See "Programming" – "Caretaker profile" –
"Change programmed beverages".
All letters and
numbers
Up to 24 characters can be
entered.
Change programmed beverages
See "Programming" – "Caretaker profile" –
"Change programmed beverages".
All available be-
verages
The available beverage ty-
pes depend on the existing
options.
"Configuration" main menu
"Self-service mode" menu Description Setting range Notes
Self-service mode active ► Deactivate/activate self-service mode.
► Save the change with the field.
The device restarts.
Inactive/active Beverage dispensing via
the DECAF field is swit-
ched off in self-service mo-
de.
"Configuration" main menu
"Accounting" menu Description Setting range Notes
Accounting On/Off
See "Programming" – "Bookkeeper Profile".
Inactive/active –
"Info" main menu
Parameter Description Setting range Notes
Machine/temporary counters Overview of all counter values of beverages
and beverage dispensing operations.
The machine and temporary counters can
only be deleted in total:
► Press the field.
– There is a difference bet-
ween user counters and
overall counters. User
counters can be deleted. It
is thus possible to allow
counters to run for a speci-
fic time. The total counters
cannot be deleted.
Cleaning statistics The date and time of the various cleanings
can be read off here.
––