www.schaerer.com Programming
BASCP_EN
V08 | 08.2018
74
Quality manager profile
The "Quality manager" can read out counters and statistics.
The "Info" main menu is contained in the "Service menu" [Settings] in the [Quality manager]
profile.
The [Quality manager] profile contains the following main menus:
• System
•Info
The following functions are available in the "Service Menu" in the [Quality manager] profile:
• Switch the milk system on/off
• Switch on quick info.
•Settings
• Standby
• Open service door
The contents of the main menus are subsequently described in this chapter.
"System" main menu
"Cleaning" menu Description Setting range Notes
Profi mode cleaning Starts the profi cleaning automatically when
cleaning is initiated.
All preparation steps are listed. These steps
can still be acknowledged as an option. After
all steps have been carried out and the ser-
vice doors are closed again, the cleaning can
be started via the active field.
Inactive/active If cleaning is cancelled
with the field, the
cleaning prompt remains.
Cleaning operations can
also be cancelled by
switching off or power fail-
ure.
A cancelled cleaning ope-
ration can be completed
by restarting the cleaning.
"Info" main menu
Parameter Description Setting range Notes
Machine/temporary counters Overview of all counter values of beverages
and beverage dispensing operations.
The machine and temporary counters can
only be deleted in total:
► Press the field.
– There is a difference bet-
ween user counters and
overall counters. User
counters can be deleted. It
is thus possible to allow
counters to run for a speci-
fic time. The total counters
cannot be deleted.
Cleaning statistics The date and time of the various cleanings
can be read off here.
––
To Next Page
Loading...
