BASCP_EN
V08 | 08.2018
57
www.schaerer.comService and maintenance
► Unpack the filter cartridge and place it in water (for ca. 15 min).
Tiny bubbles will rise from the cartridge.
► When there are no more bubbles, remove the filter cartridge from the water.
► Attach the filter cartridge to the adapter.
Changing the water filter for the internal drinking water tank (Option)
An instruction appears on the display when the filter needs to be replaced.
► Remove the drinking water tank from the machine.
► Take the old filter cartridge out of the adapter.
► Unpack the new filter cartridge and place it in water (for ca. 15 min).
Tiny bubbles will rise from the cartridge.
► When there are no more bubbles, remove the filter cartridge from the water and attach it
to the adapter.
► Slide the drinking water tank back into the machine.
Replacement cartridges can be ordered from Schaerer AG. The required article number is
contained in the machine-specific spare parts catalogue.
Exchange must be done using the display-guided instructions. The machine otherwise does
not recognise the exchange.
For correct calculation of the descaling time, the hardness of the water (determined by the wa-
ter hardness test) and the use of a filter must be entered in the coffee machine programming.
See also "Caretaker Profile" - "System" - "Maintenance" for the setting of the water hardness,
which is performed by the service technician.
See “Caretaker Profile" - "System" - "Water supply source" for a setting with water filter.
To Next Page
Loading...
