Schenker MODULAR 150 User Manual

3 – PRODUCT PRESENTATION COD.60M12/24.A.2018
EN
THE PRESENT MANUAL BELONGS TO - Schenker Italia - ALL RIGHTS RESERVED
16
WATERMAKER GROUP (BACK VIEW)
FIG. 3-8
Microcomputer
Signal pressure switch
CONCENTRATE OUTLET (OUT) AND SEAWATER INLET (IN)
FIG. 3-9
The watermaker group is composed by the following components:
• Reverse osmosis membranes
• Energy Recovery System
• Manometer
• Flowmeter
• Depressurization valve
• Positioner
• Reset valve
• Probe (pressure switch)
• Electric box
Reverse osmosis membranes, are installed inside the glass fibre high-pressure housing. Membranes are
n.3 x SW2521 type. Their purpose is to separate the intake high-pressure seawater in two flows: one for the
salt-water drain and one for the fresh water production.

Schenker MODULAR 150 Specifications

General

Brand	Schenker
Model	MODULAR 150
Category	Water Filtration Systems
Language	English