www.scheppach.com
18
|
GB
Safety information for compressors
m Attention!
must be taken when using this compressor in order
to protect the user from electric shocks and the risk
Safe work
1.
- Disorder in the work area can lead to accidents.
2.
- Do not expose power tools to rain.
- Do not use electric tools in a damp or wet
environment. There is a risk of electric shock!
- Make sure that the work area is well-illuminated.
- Do not use power tools where there is a risk of
3.
-
pipes, radiators, electric ranges, cooling units).
4.
- Do not allow other persons to touch the
work area.
5.
-
elevated or closed location out of the reach of
children.
6.
-
7.
-
can become entangled in moving parts.
- Rubber gloves and anti-slip footwear are
recommended when working outdoors.
- Tie long hair back in a hair net.
8. Do not use the cable for purposes for which it is
not intended
- Do not use the cable to pull the plug out of the
outlet. Protect the cable from heat, oil and sharp
edges.
9.
-
- Follow the maintenance instructions.
-
specialist when damaged.
-
them when damaged.
10. Pull the connector out of the socket
- When the electric tool is not in use or prior to
maintenance and when replacing tools such as
saw blades, bits, milling heads.
Power tool use and care
a. Do not force the power tool.
safer at the rate for which it was designed.
b. Do not use the power tool if the switch does
not turn it on and o. Any power tool that can-
not be controlled with the switch is danger-
ous and must be repaired.
c. Disconnect the plug from the power source
and/or remove the battery pack, if detachable,
from the power tool before making any ad-
justments, changing accessories, or storing
power tools.
d. Keep unused electric tools out of the reach of
children.
Do not let people use the electric tool who are not
familiar with it or who have not read these instruc-
e. Maintain power tools and accessories.
-
aged, have the power tool repaired before use.
power tools.
f. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
g. Use electric tools, insertion tools, etc. ac-
cording to these instructions.
for applications other than the intended uses can
lead to dangerous situations.
h. Keep handles and grasping surfaces dry,
clean and free from oil and grease.
allow for safe handling and control of the tool in
unexpected situations.
Service
a. Have your power tool serviced by a qualied
repair person using only identical replace-
ment parts.
is maintained.
To Next Page
Loading...
Need help?
General
