www.scheppach.com
20
|
GB
• Install the compressor near the point of consump-
tion.
• -
bles).
•
• Do not install the compressor in a damp or wet
room.
•
rooms (with good ventilation and an ambient tem-
-
ble gases in the room.
•
rooms. It is prohibited to use the compressor in ar-
•
•
not be left outdoors after work is complete.
10. Attachment and operation
10.1 Mains connection
•
•
mains voltage is the same as the operating voltage
(see the rating plate).
•
cause a drop in voltage and can impede motor
start-up.
•
10.2 ON/OFF switch (g. 1)
• To switch on the compressor, press the button (6)
on position I.
•
on position 0.
10.3 Commissioning (Fig. 1)
1.
2.
3.
10.4 Setting the pressure (Fig. 1)
• -
ted with the button (4). The pressure can be dis-
• You can set the pressure with buttons (3) and (5).
• The button (5) allows the desired pressure to be
reduced.
Wear hearing protection.
Noise data
m Warning:
health. If the machine noise exceeds 85 dB (A),
please wear suitable hearing protection.
Sound power level
L
wA
90 dB(A)
Sound pressure level L
pA
75,9 dB(A)
K
wA/pA
2,36 / 3 dB(A)
7. Residual risks
instructions in the operating instructions. Remain at-
tentive at all times when working and keep third par-
•
• Damage to hearing if the stipulated hearing protec-
tion is not worn.
•
• Inhaling swirled up particles.
8. Unpacking
m ATTENTION!
The device and packaging materials are not toys!
Children must not be allowed to play with plas-
tic bags, lm and small parts! There is a risk of
swallowing and suocation!
• Open the packaging and remove the device care-
• Remove the packaging material as well as the
packaging and transport bracing (if available).
•
• -
port damage.
•
period has expired.
9. Before starting the equipment
•
are identical to the mains data.
•
-
deliver the compressor.
To Next Page
Loading...
