www.scheppach.com
GB
|
23
14. Troubleshooting
Fault Possible cause Remedy
The compressor does not start.
Avoid extension cables that are too long.
cross-section.
Outside temperature is too low.
-
perature.
Motor is overheated.
eliminate the cause of overheating.
The compressor starts but there is
no pressure.
The non-return valve leaks. Replace non-return valve.
The seals are damaged.
a specialist workshop.
not running.
The hose connections have a
leak.
-
To Next Page
Loading...
Need help?
General
