www.scheppach.com service@scheppach.com +(49)-08223-4002-99 +(49)-08223-4002-58
13 | GB
Sharpening (Fig. 7)
Never sharpen against the direction of grinding! Oth-
erwise, the tool will cut into the leather!
Impregnate the leather disc using weak machine oil.
Then apply abrasive paste on the leather disc. Turn
on the device, and distribute the abrasive paste by
pressing the ground tool with circular movements on
the wheel.
These preparations are sufcient for ve to ten tools.
Then, you start again with a new layer of machine
oil, followed by new abrasive paste. These measures
increase the lifetime of the leather and the quality of
your tools.
Expert tip: You can work in the free-handed mode
for the trimming itself. You achieve a more precise
result if you keep the tool in the device in the position
in which you ground the tool.
With the star grip screw on the rear side of the ma-
chine housing (see Figure 2), you can set the contact
pressure on the friction wheel. This is necessary if
when truing the honing wheel stops.
Service information
Please note that the following parts of this product
are subject to normal or natural wear and that the fol-
lowing parts are therefore also required for use as
consumables.
Wear parts*: grinding medium, Carbon brushes,
sharpening wheel, angle gauge, v-belt
* Not necessarily included in the scope of delivery!
Special accessories
TiGer 2000
max. 150 1/min
Spezialschleifstein
zum Naßschleifen
-Hohe Schleifleistung
-Formbeständig
-Äuserst lange
Lebensdauer
Special grinding
wheel for wet
grinding
-Highly efficient
-Keeps its shape
-Extreme durability
2
1
Stone preparer, order no. 8949 0707
Change the graining of your TiGer within seconds
from 250 to 1000 and vice versa!
Device for tubes and gouges (with 100) 55,
order no. 8949 0706
You can equip nger-shaped tools with a unique
sharpness!
Device for small knives 60, order no. 8949 0708
Device for large knives 120, order no. 8949 0709
This way it’s pure fun to work in the kitchen!
Device for scissors (with 100) 160, order no. 8949
0710
Now you can easily sharpen all kinds of scissors –
whether for paper, cloth or gardening!
Device for axes 40, order no. 8949 0712
Cut rewood as fast as never before – there is no
need for huge machines.
Trimming device, order no. 8949 0713
Trimmed within seconds, and you can also polish un-
polished metal!
To Next Page
Loading...
Need help?
General
