_________________________________________________________________________________________
schunk.com XND.00005.022_A – 10/2018 48
14 EC declaration of incorporation
In terms of the EC Machinery Directive 2006/42/EC, Annex II, Part B
Manufacturer/ H.-D. SCHUNK GmbH & Co.
Distributor Spanntechnik KG
Lothringer Str. 23
D-88512 Mengen
We hereby declare that the following product:
Product designation: Single vice, hydraulic
KSG-H 125, KSG-H 160
ID-Number: 0430312, 0430317, 0340318
meets the applicable basic requirements of the Machinery Directive (2006/42/EC).
The incomplete machine may not be put into operation until conformity of the machine into which
the incomplete machine is to be installed with the provisions of the Machinery Directive
(2006/42/EC) is confirmed.
Applied harmonized standards, especially:
EN ISO 12100:2011-03 Safety of machinery - General principles for design - Risk
assessment and risk reduction
EN 62079:2001 Preparation of instructions - Structuring, content and
presentation
The manufacturer agrees to forward on demand the special technical documents for the
incomplete machine to state offices.
The special technical documents according to Annex VII, Part B, belonging to the incomplete
machine have been created.
Person responsible for documentation: Mr. Alexander Koch,
Adress: see adress of the manufacturer
Mengen, Oktober 2018 i.V. Alexander Koch; Director for Development / Design
H.-D. Schunk GmbH & Co.
Spanntechnik KG
Lothringer Strasse 23
D-88512 Mengen
Tel.: +49-7572-7614-0
Fax: +49-7572-7614-1099
info@de.schunk.com
schunk.com
To Previous Page
Loading...
Need help?
General
