SCHUNK MPG-plus User Manual

Maintenance and care
34 04.01|MPG-plus |en
Maintenance and care
Notes
WARNING
Risk of burns from hot surfaces
Depending on the application, the surface can be very hot.
Touching may cause burns to the hands:
• Wear protective gloves.
• Before working on the module, allow module to cool down.
Original spare parts
When replacing damaged parts (wearing parts/spare parts) only
use SCHUNK original spares.
Replacement of housing and base jaws
The base jaws and the guides in the housing are matched to each
other. To have these parts replaced, send the complete module
along with a repair order to SCHUNK.
Maintenance of module with gripping force maintenance "I.D.
gripping" (I.D.) and "A.D. gripping" (A.D.)
The pistons have to be aligned using an assembly device. There-
fore we recommend to have the module serviced and the seals re-
placed by SCHUNK.
If this is not possible, you can carry out the maintenance and re-
place the seals yourself.
9
9.1

SCHUNK MPG-plus Specifications

General

Brand	SCHUNK
Model	MPG-plus
Category	Industrial Equipment
Language	English