Basic safety notes
10.00 | SWS 005 – 300 | Assembly and Operating Manual | en | 389456
11
2 Basic safety notes
2.1 Intended use
The product (SWS quick-change systems, consisting of SWK quick-
change head and SWA quick-change adapter) was designed for a
quick changing of parts and automation components at a robot in
the context of its technical data.
• The product may only be used within the scope of its technical
data, Technical Data [
}
18].
• When implementing and operating components in safety-
related parts of the control systems, the basic safety principles
in accordance with DIN EN ISO 13849-2 apply. The proven safety
principles in accordance with DIN EN ISO 13849-2 also apply to
categories 1, 2, 3 and 4.
• The product is intended for installation in a machine. The
applicable guidelines must be observed and complied with.
• The product is intended for industrial and industry-oriented use.
2.2 Not intended use
It is not intended use if the product is used, for example, as a
pressing tool, stamping tool, lifting gear, guide for tools, cutting
tool, clamping device or a drilling tool.
• Any utilization that exceeds or differs from the appropriate use
is regarded as misuse.
2.3 Constructional changes
Implementation of structural changes
By conversions, changes, and reworking, e.g. additional threads,
holes, or safety devices can impair the functioning or safety of the
product or damage it.
• Structural changes should only be made with the written
approval of SCHUNK.
2.4 Spare parts
Use of unauthorized spare parts
Using unauthorized spare parts can endanger personnel and
damage the product or cause it to malfunction.
• Use only original spare parts or spares authorized by SCHUNK.
To Next Page
Loading...
